| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Steering | Section: Steering Column | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000030KU002X |
| Title: STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (for Power Tilt and Power Telescopic Steering Column): REMOVAL (2008 Sequoia) | ||
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
- After the ignition switch is turned off, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch off, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
-
Some systems need to be initialized after the cable is reconnected
.
2. REMOVE UPPER STEERING COLUMN COVER
|
(a) Remove the 2 screws. HINT:
Turn the steering wheel to the right and left as necessary to remove the 2 screws. |
|
(b) Detach the 4 clips. |
(c) Detach the claw to remove the upper steering column cover.
3. REMOVE LOWER STEERING COLUMN COVER
(a) Detach the 2 claws to remove the lower steering column cover.
4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT
7. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY
8. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Disconnect the 2 ECU connectors.
(b) Remove the 2 screws and ECU.
|
|